Message Queue Type 1 - Direct Pager to TAP Gateway
You would need to have access to a TAP gateway to be able to use message types 1 and 2, this is a specialised piece of equipment that accepts SMS and or pager messages for transmission by a carrier.
The Pager type uses a TAP gateway. I.e. it sends directly to a piece of equipment run by the phone company - It requires a connection to this gateway. NOT generally available to most installations.
This option utilises the [fromAddress], [toAddresses] and [messageText] fields to contain the mobile number to send to, and the Messagetext to send via pager.
The message queue service code performs the following actions:
Message character limit of 222 for pager
Message character limit of 159 for sms
MessageText (Message) - Truncate into separate messages if too long
Check for SMSType, SMSUsername, SMSPassword in message queue config file
If SMSType = http then send sms otherwise send pager
